Ensuring your Bekhic dash camera is properly programmed is crucial for optimal performance and capturing critical moments on the road. This guide will walk you through the essential steps to program your Bekhic dash camera, maximizing its features for your car.
Before diving into the programming, it’s important to understand the basic components and setup of your Bekhic dash camera. Typically, this involves inserting a microSD card for storage and connecting the camera to a power source in your vehicle, often through the car’s cigarette lighter socket or USB port. Proper mounting is also key to ensure the camera has a clear view of the road.
Once your Bekhic dash camera is physically installed, you can begin the programming process. Most Bekhic dash cameras feature a user-friendly menu system navigated via buttons on the device. The initial step is usually powering on the camera, which will typically boot up automatically when the car starts, depending on your wiring setup.
Navigating the menu is done using the buttons on your dash camera. These buttons usually allow you to move up, down, select, and go back within the menu system. Consult your Bekhic dash camera’s manual for the precise button layout and functions as it may slightly vary between models. Look for a ‘Menu’ button to start accessing the settings.
Within the menu, you will find various options to program your Bekhic dash camera. Key settings to configure include:
-
Resolution: Adjusting the video resolution is vital for video quality and storage space. Higher resolutions like 1080p or 4K provide clearer footage but consume more storage. Choose a resolution that balances clarity and recording duration based on your microSD card capacity.
-
Loop Recording: This function ensures continuous recording by overwriting the oldest footage when the memory card is full. You can usually set loop recording intervals like 1 minute, 3 minutes, or 5 minutes. This is a crucial setting to ensure your camera is always recording without interruption.
-
G-Sensor Sensitivity: The G-sensor detects sudden movements like collisions. Adjusting its sensitivity determines when the camera automatically locks and saves footage, preventing it from being overwritten by loop recording. A higher sensitivity means even minor bumps can trigger recording, while lower sensitivity requires stronger impacts.
-
Parking Mode: If your Bekhic dash camera supports parking mode, you can enable it to monitor your car while parked. This mode often uses motion detection or impact detection to start recording if something happens to your vehicle. Programming parking mode may involve setting sensitivity levels and recording durations.
-
Date and Time: Accurate date and time stamps are essential for video evidence. Ensure you set the correct date and time in your Bekhic dash camera’s settings menu. Some models may offer automatic time synchronization via GPS if equipped.
-
Wi-Fi and App Connectivity: Some Bekhic dash camera models offer Wi-Fi connectivity, allowing you to connect to a smartphone app. Programming this feature usually involves enabling Wi-Fi on the camera and following instructions in the app to connect. This can enable live viewing, footage download, and settings adjustments via your phone.
After configuring all your desired settings, ensure you save the changes within the menu system. Typically, navigating back to the main menu screen will automatically save your programmed settings. It’s always a good practice to power cycle your dash camera (turn it off and on again) to ensure all settings are properly applied.
By carefully programming your Bekhic dash camera, you can tailor it to your specific needs, ensuring it effectively captures important events while driving and provides peace of mind. Always refer to your Bekhic dash camera’s user manual for model-specific instructions and advanced programming options.
