Finding your Acura radio code can be frustrating, especially if your car battery dies or the radio is disconnected. This code, tied to your Acura Radio Code Serial Number, is an anti-theft measure that requires a specific unlock code to reactivate the audio system. This guide will walk you through how to find your Acura radio code serial number and retrieve your radio code.
Where to Find Your Acura Radio Code
There are several places to look for your Acura radio code:
- Glove Box: Check inside your glove compartment for a sticker or card containing the radio code. This is often the easiest place to find it.
- Fuse Box Cover: If you can’t find the code in the glove box, look on the inside of the engine fuse box cover. The code may be printed on a sticker there.
- Acura Owner’s Manual: Your owner’s manual might contain information about the radio code or instructions on how to locate it.
Finding Your Acura Radio Code Online
If you can’t locate the code using the methods above, you can retrieve it online through the Acura website. You’ll need two key pieces of information:
- Vehicle Identification Number (VIN): A 17-digit alphanumeric code unique to your vehicle.
- Device Serial Number: A unique code specific to your car radio.
Locating Your Acura VIN
Your VIN can be found in several locations:
- Driver’s Side Doorjamb: Look for a sticker on the driver’s side doorjamb near the latch.
- Windshield Base: Check the lower corner of the windshield on the driver’s side.
- Vehicle Registration and Insurance Documents: Your VIN will be listed on your vehicle registration and insurance cards.
Locating Your Acura Device Serial Number
Finding your Acura device serial number can be slightly more involved, depending on the model year:
For Models 2001 and Later:
- Turn the ignition to the ON position.
- Turn the radio ON. If the code doesn’t display, try pulling the radio fuse and repeating this step.
- Turn the radio OFF.
- Press and hold the number buttons 1 and 6 simultaneously, then turn the radio ON.
- The display will show a “U” followed by the first four digits of the serial number. Write these down. Repeat the process to obtain the remaining digits.
For Models 2004-2008 with Navigation:
- Turn the ignition to the ACC or ON position.
- Turn the radio ON. If “CODE” doesn’t appear, pull the radio fuse and repeat.
- Turn the radio OFF.
- Simultaneously press and hold the top of the SEEK/SKIP and CH/DISC buttons, then press and release the Power/Volume knob. The display will cycle between two screens.
- One screen will show a “U” followed by the first four digits of the serial number. Note these down and repeat to get the rest of the code.
Retrieving Your Acura Radio Code
Once you have your VIN and device serial number, visit the official Acura website and navigate to the radio or navigation code retrieval section. Enter the required information, and the website should provide your Acura radio unlock code.
What to Do if You Still Can’t Find Your Code
If you’ve exhausted all options and still can’t find your Acura radio code, contact your local Acura dealer or a qualified car audio specialist for assistance.
This guide has outlined the key steps to finding your Acura radio code serial number and retrieving your unlock code. With a little patience and persistence, you should be able to get your Acura radio working again in no time.
