Are you having trouble with your 1998 Honda CRV car key remote? Perhaps it’s stopped working, or you’ve purchased a replacement and need to get it programmed. You’ve come to the right place! As car repair experts at carcodereader.store, we understand how frustrating it can be when your key fob isn’t cooperating. Luckily, programming your 1998 Honda CRV key is a straightforward process you can do yourself at home, without needing to visit a dealership.
This guide will provide you with clear, easy-to-follow instructions on How To Program 98 Crv Honda Car Key remotes. Before you begin, please note that entering programming mode will erase all previously programmed remotes. Therefore, you will need to reprogram all of your remotes at the same time to ensure they all function correctly. Make sure you have all the remotes you intend to use ready before starting this procedure. Also, each step must be completed within 5 seconds of the previous one to prevent the system from exiting programming mode prematurely.
Let’s get started and get your key fob working again!
Step-by-Step Programming Instructions
Follow these steps carefully to successfully program your 1998 Honda CRV car key remote:
-
Turn the Ignition to the ON Position (II). Insert your key into the ignition and turn it to the “ON” position. This is the position just before you would start the engine, where the dashboard lights illuminate.
-
Press the LOCK or UNLOCK Button on a Remote. Take one of your remotes (it can be a new, unprogrammed remote or an existing one) and press either the “LOCK” or “UNLOCK” button.
-
Turn the Ignition to the LOCK (0) Position. Turn the ignition key back to the “LOCK” or “OFF” position. Do not remove the key from the ignition.
-
Repeat Steps 1-3 Two More Times. You will need to cycle the ignition from “ON” to “LOCK” and press a button on the remote a total of three times, using the same remote each time. So, repeat steps 1, 2, and 3 two more times in quick succession.
-
Turn the Ignition to the ON Position (II) Again. After the third cycle, turn the ignition key back to the “ON” position one last time.
-
Press the LOCK or UNLOCK Button on the Same Remote and Confirm. Press the “LOCK” or “UNLOCK” button on the same remote you have been using throughout this process. Listen carefully for the power door locks to cycle (lock and then unlock). This door lock cycle is your confirmation that you have successfully entered programming mode.
-
Program Each Remote. Now, take each remote you want to program, one at a time, and press the “LOCK” or “UNLOCK” button on each. After pressing a button on each remote, the power door locks should cycle again, confirming that the system has accepted and programmed that remote.
-
Turn the Ignition to the LOCK (0) Position to Exit Programming Mode. Once you have programmed all of your remotes, turn the ignition key back to the “LOCK” or “OFF” position to exit the programming mode.
-
Test Your Remotes. Finally, test each of your programmed remotes to ensure they are working correctly. Press the “LOCK” and “UNLOCK” buttons on each remote to verify that they control the door locks as expected.
If you have followed these steps carefully, your 1998 Honda CRV car key remotes should now be successfully programmed and functioning correctly.
Troubleshooting Tips
- Timing is Crucial: Ensure you complete each step within 5 seconds of the previous one. If you are too slow, the system might exit programming mode, and you will need to start over.
- Use the Same Remote Initially: For steps 2, 4, and 6, it is important to use the same remote throughout the initial programming sequence until you reach step 7 where you program all remotes.
- Check Battery: If you are still having issues, double-check the batteries in your remote fobs to ensure they are not dead or weak. Replace them if necessary and try the programming steps again.
If you continue to experience difficulties programming your key fobs, it’s possible there might be an issue with your vehicle’s receiver or the remotes themselves. For further assistance or if you need replacement remotes, visit us at Keylessentryremotefob.com. We offer a wide selection of key fobs and can help you find the right solution for your needs.
Disclaimer: This information is provided as a guide and for informational purposes only. Always consult your vehicle’s owner manual and/or a qualified automotive technician for specific instructions and diagnosis related to your vehicle.
