Are you having trouble with your Nissan Murano 2007 key fob? Perhaps it’s stopped working, or you’ve purchased a new one and need to get it programmed to your vehicle. Luckily, programming a key fob for your 2007 Nissan Murano can often be done at home without the need for expensive dealership services. This guide provides you with straightforward, step-by-step instructions to program your key fob, saving you time and money.
Step-by-Step Programming Guide for Your 2007 Nissan Murano Key Fob
Before you begin, it’s important to note that these instructions are for standard keyless entry programming. If your 2007 Nissan Murano uses a silver “smart key,” unfortunately, this DIY method will not work. Vehicles with smart keys typically require dealership or professional locksmith programming due to more complex security systems. However, for standard key fobs, follow these steps carefully:
Step 1: Vehicle Preparation – Get Inside and Lock the Doors
The first step is to get inside your Nissan Murano and ensure all doors are completely closed. Once inside, use the power lock switch located on the driver’s side door panel to lock all doors. It’s crucial to use the door switch and not your existing remote for this step. This action prepares your vehicle to enter programming mode.
Step 2: Initiate Programming Mode – The Key Insertion Sequence
This step involves a specific sequence of key insertions into the ignition switch. Take your Nissan Murano key and insert it into the ignition, then remove it completely. Repeat this process a total of six times within a 10-second period. It’s important to maintain a consistent rhythm, inserting and removing the key fully each time, roughly at one-second intervals. If performed correctly, your hazard lights should flash. This flashing indicates that your Nissan Murano has successfully entered programming mode. If the hazard lights do not flash after six attempts, try the procedure again, this time repeating the key insertion and removal ten times instead of six.
Step 3: Program the First Remote – Engage the Lock Button
Now that your vehicle is in programming mode (hazard lights flashing), insert the key into the ignition switch and turn it to the “ACC” (Accessory) position. Within five seconds of turning the key to ACC, take the new key fob you wish to program and press the “lock” button once. If the programming is successful for this remote, your hazard lights will flash again to confirm.
Step 4: Program Additional Remotes (If Applicable) – Unlock, Lock, and Program
If you have additional key fobs to program, including both new and any existing remotes you want to continue using, you’ll need to follow this step. Using the power lock switch on the driver’s side door (again, do not use the remote), first press the “unlock” button then immediately press the “lock” button to cycle the door locks. Within five seconds of cycling the door locks, take the next remote you want to program and press the “lock” button once. The hazard lights will flash to confirm successful programming of this additional remote. Repeat this Step 4 process for every remaining remote you need to program.
Step 5: Finalize Programming – Turn Off Ignition and Remove Key
Once you have programmed all desired key fobs, it’s time to exit programming mode. Simply turn the ignition switch to the “OFF” position and then completely remove the key from the ignition.
Step 6: Test Your Remotes – Confirm Successful Programming
The final step is to verify that all programmed key fobs are working correctly. Use the power lock switch on the driver’s side door to unlock all doors (again, using the switch, not the remote). Then, test each remote individually by pressing the lock and unlock buttons to ensure they properly control the door locks and other keyless entry functions of your 2007 Nissan Murano.
Troubleshooting and Professional Help
If you encounter difficulties programming your key fob, double-check each step and ensure you are following the instructions precisely. Pay close attention to the timing in each step, especially the key insertion sequence and the button presses. If you are still unable to program your key fob, or if your vehicle uses a silver smart key, it’s recommended to seek professional help. You can locate a qualified locksmith or your local Nissan dealership to program your key fob for you. They have specialized tools and expertise to handle more complex programming needs.
