Having a properly working car remote for your Infiniti is essential for convenience and security. Whether you’ve lost a remote, replaced a battery, or added a new key fob, knowing how to program it yourself can save you time and money. This guide provides a straightforward, step-by-step process to program your Infiniti car remote, ensuring you regain seamless access to your vehicle.
Step-by-Step Programming Guide
This procedure is designed for a range of Infiniti models including QX4, Q45, I30, I35, G20, FX, G35, M45, and also applicable to most Nissan vehicles from the same era. Before you begin, ensure all doors are closed and locked.
Step 1: Prepare Your Infiniti for Programming
Begin by ensuring all doors of your Infiniti are completely closed and securely locked. This initial step is crucial for initiating the programming sequence correctly.
Step 2: Initiate Programming Mode
This step involves a specific key insertion and removal sequence in the ignition. Insert your key into the ignition cylinder and remove it more than six times within a 10-second timeframe. It’s important to fully withdraw the key from the ignition cylinder each time. Avoid rushing this process; consistent and complete insertion and removal are key to success. If executed correctly, the hazard warning lamps will flash, and as a confirmation, the side marker, tail, license plate lamps, and interior lights will flash twice, indicating that your Infiniti has entered programming mode.
Step 3: Enter New Remote ID Code
Once your vehicle is in programming mode, insert the key back into the ignition cylinder and turn the ignition switch to the “AAC” (Accessory) position. At this point, the system is ready to learn the new remote ID code, and any previous codes are erased for security.
Now, take your new remote controller and press any button on it just once. It’s crucial to only press the button one time during this step. Pressing it multiple times can disrupt the programming sequence and lead to failure. Upon successful programming of the new remote ID, the hazard warning lamps will flash again, and the side marker, tail, license plate lamps, and interior lights will flash twice, confirming successful programming.
Step 4: Program Additional Remotes (Optional)
If you have more than one remote to program, you can proceed with this step. If you only have one, you can skip to Step 5. To program additional remotes, without turning off the car, release the door lock and then lock it again using the door lock/unlock switch located on the power window main switch panel. After locking the doors again, immediately press any button on the next new remote controller you wish to program. Again, ensure you press the button only once. Repeat this Step 4 for each additional remote you need to program, up to a maximum of four remotes.
Step 5: Final Steps to Exit Programming Mode
To finalize the programming process, remove the key from the ignition. Then, unlock the driver’s side door, open the driver’s side door, and then close it. This sequence signals the end of the programming procedure.
By following these steps carefully, you should have successfully programmed your new Infiniti car remote. You can now test all the buttons on your remote to ensure they are functioning correctly with your vehicle’s locking system.
Conclusion
Programming your Infiniti car remote can be a simple task when you follow these instructions. This DIY approach not only saves you money but also provides a sense of accomplishment. However, if you encounter any difficulties or are unsure about any step, it’s always recommended to consult a professional mechanic or your Infiniti dealership for assistance. Enjoy the convenience of your newly programmed remote!
