Unlock the convenience of integrated technology in your Infiniti with the HomeLink Transceiver system. This feature allows you to seamlessly operate your garage door, home lighting, and other compatible devices with the touch of a button directly from your vehicle. This guide provides step-by-step instructions on how to program your garage door opener to your Infiniti car using the HomeLink system, ensuring a smooth and efficient setup process.
Step-by-Step Guide to Programming Your HomeLink System
Before you begin, note that the HomeLink buttons in your Infiniti may be located on your rearview mirror, visor, or front console. These instructions are applicable regardless of the location in your vehicle.
1. Clear Existing Programming (First Time Setup or Reset)
To begin programming, you may need to clear any previous settings from the HomeLink system. If you are programming HomeLink for the first time, or wish to reset the system, follow these steps:
- Press and Hold Outer Buttons: Simultaneously press and hold the two outer HomeLink buttons.
- Wait for Indicator Light: Continue holding the buttons until the red indicator light begins to flash rapidly. This should take approximately 20 seconds.
- Release Buttons: Once the indicator light is flashing rapidly, release both buttons. The system’s memory is now cleared and ready for programming.
Infiniti HomeLink buttons for garage door opener programming
2. Programming Your Garage Door Opener
With the HomeLink system cleared (if necessary), you can now program it to your garage door opener.
- Locate Hand-Held Transmitter: Take your garage door opener’s hand-held transmitter.
- Position Transmitter and HomeLink Buttons: Hold the transmitter approximately 1-3 inches away from the HomeLink buttons in your Infiniti.
- Simultaneous Press: Choose the HomeLink button you wish to program to your garage door. Press and hold this HomeLink button while simultaneously pressing the open button on your hand-held garage door transmitter.
- Hold Until Indicator Light Changes: Continue holding both buttons until the red indicator light on the HomeLink system changes from a slow blink to a rapid flash. This process may take up to 90 seconds.
- Release Buttons: Once the indicator light is flashing rapidly, release both buttons.
- Test the Connection: Press the newly programmed HomeLink button to verify that it activates your garage door. If the garage door opens, programming is complete.
3. Addressing Rolling Code Protection
Many modern garage door openers, especially those manufactured after 1996, are equipped with “rolling code protection”. This security feature changes the access code each time the opener is used. If your garage door opener has rolling code protection, you may encounter a slightly different indicator light pattern during programming.
Identifying Rolling Code Protection:
If, after completing step 2, the indicator light flashes for only two seconds and then illuminates steadily instead of continuously flashing rapidly, your garage door opener likely has rolling code protection.
Programming with Rolling Code Protection:
To program HomeLink with a rolling code system, you will need to access the “smart” or “learn” button on your garage door opener motor unit.
- Locate “Smart” or “Learn” Button: Find the “smart” or “learn” button on your garage door opener motor. This button is usually located on the back or side of the motor unit.
- Press and Release “Smart” Button: Press and release the “smart” or “learn” button on the garage door motor. Note: You typically have a limited time (usually 30 seconds) after pressing this button to complete the next step. Having a second person assist can be helpful.
- Return to Your Infiniti: Immediately return to your Infiniti and firmly press and hold the HomeLink button you programmed in Step 2 for two seconds, then release.
- Repeat Press and Hold: Repeat the press and hold process on the HomeLink button two more times (for a total of three times).
- Programming Completion: The indicator light on the HomeLink system should become solid when programming is complete.
- Final Test: Press the programmed HomeLink button again to confirm that it now successfully operates your garage door.
By following these instructions, you should be able to easily program your Infiniti HomeLink system to your garage door opener, enjoying the added convenience and security this feature provides. If you require further assistance, consult your Infiniti owner’s manual or contact your local Infiniti dealership for support.
