Are you having trouble with your 1997 Acura TL key fob? Perhaps it stopped working, or you’ve replaced the battery and need to reprogram it. Luckily, programming your key fob for a 1997 Acura TL at home is a straightforward process that can save you a trip to the dealership. This guide provides clear, step-by-step instructions to get your key fob working again quickly.
Programming Instructions for Your 1997 Acura TL Key Fob
These instructions are specifically for 1997 Acura TL models and are designed for vehicles with a factory-installed security system. Please ensure your vehicle is a 1997 Acura TL before proceeding. This system can learn up to two transmitter codes, and entering programming mode will erase all previously learned codes, requiring you to reprogram all your transmitters.
Here’s how to program your key fob:
- Open the Driver’s Side Door: Begin by opening the driver’s door of your 1997 Acura TL.
- Unlock the Doors Manually: Locate the master power door lock switch on the driver’s side door panel. Push and hold this switch to the “UNLOCK” position. Maintain this hold throughout the programming procedure.
- Key Insertion and Removal Sequence: Take your ignition key and insert it into the ignition switch, then immediately remove it. Repeat this insert and remove action a total of five times in rapid succession within a 10-second timeframe. Speed is key here, ensure you complete these steps quickly.
- Enter Programming Mode: Insert the key into the ignition switch one last time and leave it in. At this point, observe the power door locks. They should cycle (lock then unlock) automatically. This cycling indicates that your Acura TL’s system has successfully entered the key fob programming mode. If the locks do not cycle, repeat steps 3 and 4 ensuring you are within the 10-second time limit.
- Transmitter Programming: Take the key fob transmitter you wish to program. Press either the “LOCK” or “UNLOCK” button on the transmitter. After pressing the button, listen and watch for the power door locks (excluding the driver’s door) to cycle once more. This cycle confirms that the system has accepted and learned the code from the transmitter.
- Programming a Second Transmitter (Optional): If you have a second key fob transmitter to program, you can do so immediately. Within 10 seconds of programming the first transmitter, press the “LOCK” or “UNLOCK” button on the second transmitter. Again, the power door locks should cycle to confirm successful programming.
- Exit Programming Mode: Release the master power door lock switch that you have been holding in the “UNLOCK” position. This action will signal the system to exit the programming mode.
Now, test both of your programmed key fob transmitters to ensure they are working correctly with your 1997 Acura TL.
Ordering a Replacement Transmitter
Should you need to order a replacement key fob transmitter for your 1997 Acura TL, these can only be obtained through authorized Acura dealerships. Acura dealers order transmitters from American Honda using standard parts ordering procedures. Contact your local Acura dealer to order a new transmitter if needed.
Key Fob Battery Information
If your key fob is not functioning, the first step should always be to replace the batteries. The 1997 Acura TL key fob transmitter uses CR2016 batteries. Each transmitter requires two CR2016 batteries. Replacing the batteries is a simple process and can often resolve key fob issues without needing to reprogram, though reprogramming might still be necessary after battery replacement in some cases.
By following these instructions, you should be able to program your 1997 Acura TL key fob easily and get back to enjoying the convenience of remote locking and unlocking.