If your Honda’s battery died or was disconnected, you’ll likely need your radio or navigation code to unlock it. Fortunately, you can retrieve this code online through Https//radio-navicode.honda.com without needing a trip to your Honda dealer. This article will guide you through the process of obtaining your unlock code.
Locating Your VIN and Device Serial Number
To get your unlock code via https//radio-navicode.honda.com, you’ll need two key pieces of information: your Honda’s Vehicle Identification Number (VIN) and the serial number of your radio or navigation device.
Finding Your Honda VIN
Your VIN is a 17-digit code that uniquely identifies your vehicle. You can find it in several locations:
- Driver’s Side Windshield: Look at the base of the windshield on the driver’s side.
- Vehicle Registration: Your VIN is printed on your vehicle registration documents.
- Insurance Documents: Check your insurance statement or proof-of-insurance card.
- Honda Financial Services Statement: If you financed your Honda, your VIN will be on your statement.
- Honda Correspondence: Look for your VIN on any new owner surveys or customer satisfaction surveys from American Honda.
Note: Valid VINs use letters A-Z and numbers 0-9, excluding the letters I, O, and Q. Double-check for accuracy, ensuring numbers and letters aren’t transposed.
Finding Your Device Serial Number
Locating your device’s serial number can vary depending on your Honda model:
- 2013-2014 Odyssey or Pilot: These models don’t require a code. Consult your owner’s manual for system initiation instructions.
- Pre-2001 Models: The serial number is on the back of the device. You’ll need to schedule a service appointment with your Honda dealer.
- 2001 and Later Models: You can usually find the serial number on a sticker in the glove box or by accessing the device display.
For models where the serial number is displayed on the device itself, follow these instructions:
General Instructions for Most Models:
- Turn the ignition to the ON position.
- Power on the radio or navigation system. If the display shows “COdE,” proceed to the next step. If not, pull the backup fuse for one minute and repeat step 1.
- Turn off the device.
- Simultaneously press and hold the 1 and 6 radio preset buttons, then power on the device.
- The display will alternate between two screens, one starting with “U” and displaying the first four digits of the serial number, and the other starting with “L” and displaying the last four digits. Record all eight digits, ignoring the “U” and “L.”
2003-2007 Accord with Navigation:
- Turn the ignition to the ACC (I) position.
- Turn on the audio unit. If the display shows “COdE,” proceed to the next step. If not, pull the backup fuse for one minute and repeat step 1.
- Turn off the audio unit.
- Press and hold the upper halves of the SEEK/SKIP and CH/DISC buttons, then press and release the PWR/VOL knob.
- The display will alternate between two screens showing the first four digits (preceded by a “U”) and the last four digits (preceded by an “L”) of the serial number. Record all eight digits.
Obtaining Your Unlock Code Using https//radio-navicode.honda.com
Once you have your VIN and serial number, visit https//radio-navicode.honda.com to retrieve your unlock code. The website operates Monday-Friday 6 AM to 11 PM CDT, Saturdays 6 AM to 8:30 PM CDT, and Sundays 6 AM to 11 PM CDT. Enter your information in the “Get Codes” section, providing your current phone number, zip code, and a valid email address to receive your confirmation and unlock code.
